联系我们 contact us
　单位名称:温州市新矿粉体机械有限公司
　单位地址:温州市瓯海娄桥东耕村吹台西路4号
　办 事 处:温州市瓯江大厦1707室
　法人代表:周玉麟 　13806878405
　销售经理:胡方勤 　13806878541
　销售电话:0577-86785928
　传　　真:0577-86785928
　邮　　编:325000
URL:http://www.xkft.com
　振动磨系列产品 product form
型号\参数
总容积
（L）
振动频率
（Hz）
振幅
（mm）
功率
（kw）
2MZS—3
3
23.2
3—4
0.55
3MZ—30
30
23.8
≤3
2.2
MZ—200
200
24.3
≤3
11
3MZ—300
300
24.3
≤3
22
2MZ—400
400
24.5
≤3
30
2GDMZ—400
400
16.2
8—11
55
2MZ—800
800
16.33
≤7
55
MZ—840
840
24.6
4
55
2MZGW—1200
1200
16.33
10.38
120
　用途与特点
　　　本公司生产的振动磨广泛应用于硅酸盐、耐火材料、建材、药物、化工、无线电、粉末冶金、钨业、磁性
　材料、轻工等工业部门料磨石英、石墨、蜡石、高岭土、涂料、玻璃料及其它矿物料和非金属材料等。是一种
　高效率细磨和超经磨设备。它不仅能用于粉磨物料，而且还能有效地做混合机使用。特别是MZ-200、MZ-840
　振动磨对物料的超细粉磨与易氧化物料采用惰性气体保护尤能显示优点。
　　单筒式振动磨为间歇式振动磨，可用于湿法和干法粉磨。
　　双筒式振动磨主要用于连续粉磨场合，可用于湿法和干法粉磨。
　　筒体内壁可直接衬贴橡胶，也可以加衬金属或其它材质衬板。
　　根据需要可采用合金钢质、瓷质或其它村质的磨介。
　粉磨能力持性
　　　根据进、出料粒度的要求不同，粉磨工艺过程区分为细磨与超细磨段。
　　 所谓细磨是指进料粒度为1-2mm，以处理得到200-300目料体为目的的粉磨过程。
　　 超细粉磨是指进料粒度小于0.85mm，以处理得到小于28μm粉体产物为目的的粉磨过程。
　Use&Feature
 　　The vibration mill produced by us is widely used in silicate,refractory,building chemistry,radio,powder metallurgy, tungster, magnetic material industry or light industry as well as in milling quartz, graphite,limestone, wax stone, kaolin, coating, glass material and other mineral materials and non-metallic materials etc.It's an effective equipment of fine or ultra-fine milling. It's ont only used in milling materials but also used as a mixer blender availably. Especially, the MZ-200, MZ-840 vibration mill is more advantaged in ultra-fine milling and in milling easily oxidizable materials adopted protect １by inert gasses.
　　Single tube vibration mill is an intermittent one. It can be used for wet or dry milling.
　　Double tube vibration mill is mainly used in continuous milling. It can be used for wet or dry milling.
　　Rubber and metal or other materials plate are sticked inside tube.
　　It also can adopt milling medium of alloy steel, porcelain medium or other materials medium according to the requirement.
　The Charactristics of Milling
　　As the different requirement of feed grain size and outgoing grain size, the milling procedure is divided into two stages: fine milling and ultra-fine milling.
　　The first one is the procedure that the feed grain size is 1-2mm and getting ghe powder of 200-300mesh.
　　The second one is the procedure that the feed grain size is smaller than 0.85mm and getting powder of 28μm.